Type: Driver
File Name:
File Size: 37.6 MB
8 (4.65)
Downloads: 9
Supported systems: Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10
Price: Free* (*Free Registration Required)

Download Now

The package contents may be different due to area or your motherboard version.

X is controlled by P Remove Pin Cap before installation, and make good preservation for future use. Pull the socket locking lever out from the socket and then raise the lever up. Remove the Pin Cap.

Look for the triangular cut edge on socket, and the golden dot on CPU should point Biostar TP67B+ Ver. 6.1 this triangular cut edge. The CPU will fit only in the correct orientation. Hold the CPU down firmly, and then lower the lever to locked position to complete the installation.


The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin 1. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Biostar TP67B+ Ver. 6.1 and should be connected to GND.

Biostar Page 8

Unlock a DIMM slot by pressing the retaining clips outward. Install memory module of the same density in pairs, shown in the table. This PCI slot is designated as 32 bits. Pin opened Pin closed Pin closed 3.

Headers for USB 2. Consumer IR Connector This header is for infrared remote control and communication. Please carefully follow the procedures to avoid damaging the motherboard. Remove AC power line. Wait for five seconds.

Leading Supplier of Biostar Computer Hardware Parts

Power on the AC. Reset your desired password or clear the CMOS data. Power Status Indicators Biostar TP67B+ Ver. 6.1 refer to the tables below for specific messages: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications.


RAID 1 defines techniques for mirroring data. RAID 5 provides fault tolerance and better utilization of disk capacity.

It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access Biostar TP67B+ Ver. 6.1 and offers high bandwidth. Minimum 2, and maximum is up to 6 or 8.

Depending on the platform. Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance. No capacity loss penalty for parity.

  • Biostar Computer Hardware, IT Hardware Catalog
  • BIOSTAR Motherboard Socket : Drivers Download for Windows 7, , 10
  • Biostar Drivers & Downloads - Biostar
  • Download file
  • Biostar - Computer Hardware Parts List
  • Biostar Driver Downloads

Does not deliver any fault tolerance. If any drive in the array fails, all data is lost. Every read and write is actually carried out in parallel across 2 disk Biostar TP67B+ Ver. 6.1 in a RAID 1 array system.

#Biostar CPU-Upgrade

The mirrored backup copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. Supports the Intel 2nd generation Biostar TP67B+ Ver. 6.1 i7 and Core i5 processors in the package. Intel P67 chipset. Intel LGA 2nd Generation Intel Coreâ„¢ Processors support. Buy BIOSTAR TP67B+ LGA Intel P67 SATA 6Gb/s USB ATX Intel Motherboard with fast shipping and top-rated Audio Channels: 6 Channels.


Other Drivers