GIGABYTE GA-X48-DS5 SATA2 DRIVER DETAILS:
|File Size:||12.8 MB|
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other|
|Price:||Free* (*Free Registration Required)|
GIGABYTE GA-X48-DS5 SATA2 DRIVER
See this post for additional information.
You might need to test by replacing and testing one component at a time: You might need Gigabyte GA-X48-DS5 SATA2 test using the stock Intel heat-sink and fan. Sometimes there is an incompatibility with a psu and mobo, even though your psu might work fine with another setup.
GIGABYTE GA-X48-DS5 Intel X48 LGA775 Core 2 Duo Quad DDR2 SATA2 Motherboard R1.1
Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. Completely raise the CPU socket lever.
Remove the protective socket cover. Lift the metal load plate on the CPU socket. Hold the CPU with your thumb and index fingers. Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back into its locked position.
The following procedure uses Intel boxed cooler as the example cooler. Apply an even and thin layer of thermal grease on the surface of the installed CPU.
Before installing the Gigabyte GA-X48-DS5 SATA2, note the direction of the arrow sign on the male push pin. Turning the push pin along the direction of arrow is to remove the cooler, on the contrary, is to install.
GA-XDS5 Základní desky - GIGABYTE
Place the cooler atop the CPU, aligning the four push pins through the pin holes on the motherboard. Push down on the push pins diagonally. You should hear a "click" when pushing down each push pin.
- GIGABYTE GA-XDS5 USER MANUAL Pdf Download.
- Gigabyte GA-EPDS3P SATA2 RAID Driver – – Probably all
- Gigabyte ga p35 s3g original used desktop motherboard p35 s3g p35 lga 775 ddr2 8g sata2 atx
- Download Gigabyte GA-X48-DS5 motherboard User's Manual
- Δημοφιλείς Gigabyte Μητρικές Πλακέτες οδηγοί:
- GIGABYTE GA-X48-DS5 rev. 1.x, LGA 775/Sockel T Motherboard
Check that the Male and Female push pins are joined closely. Refer to your CPU cooler installation manual for instructions on installing the cooler. After the installation, check the back of the motherboard. If the push pin is inserted as the picture above, the installation is complete. Hardware Installation 16 Installing the Memory Read the following guidelines before you Gigabyte GA-X48-DS5 SATA2 to install the memory: Make sure that the motherboard supports the memory.
Drivers and utilites for Gigabyte motherboards - choice of model.
It is recommended that memory of the same capacity, brand, speed, and chips be used. Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only one direction.
After the Gigabyte GA-X48-DS5 SATA2 is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual Channel memory mode will double the original memory bandwidth. The four DDR2 memory sockets are divided into two channels and each channel has two memory sockets as following:Free Download Gigabyte GA-XDS5 (rev.
Gigabyte GA-X48-DS5 SATA2 1.x) SATA2 Preinstall Driver x86 (Other Drivers & Tools). Revolution energy saving design with DES Advanced technologySupports Intel® Core 2™ multi-core and 45nm processors MHz FSB (Front Side Bus) Missing: SATA2.