Type: Driver
File Name:
File Size: 10.6 MB
24 (4.86)
Downloads: 13
Supported systems: Windows All
Price: Free* (*Free Registration Required)

Download Now

The selected Satellite and other parameters are pre-selected each time by default when you load the program.

  • KWorld DVB-S Help!! - Windows 7 Help Forums
  • KWORLD DVB-S SE PCI Satellite Free-to-Air, Remote, S-Vide - £ PicClick UK
  • Recommended System Requirements
  • KWorld DVB-S 100 TV Card Remote Control Utility
  • You're here
  • KWorld DVB-S 100 - digital TV tuner / video capture adapter

You can also sort the information by clicking the tabs. Every satellite has many transponders and you must select the transponder for the satellite where your dish is now directed to. Click on the Transponder Button and select the transponder in the Transponder list you want to check. To obtain the best possible results, it is recommended that FastSatfinder users should download the most recent transponder files.

You can download them here. You can manually add a transponder to the list, but you will need to know the frequency, symbol rate, and polarity of the transponder that you want to add. To add a transponder, enter the parameters of the transponder and click on the Add Button under the Transponder list. Use the following format: To delete a transponder that you are no longer using, highlight the transponder and click Delete under the Transponder list.

Kworld dvb-s no signal MediaPortal HTPC

Control Panel The Control Panel provides information about the current configuration and shows indicators of the signal that displays the current values of quality and level. On the Control Panel you will also find several buttons which can be used to control the sound parameters.

There are seven sound modes that you can select by clicking the Sound Button: Auto - if KWorld DVB-S 100 TV Card Remote Control when a signal is found, it will three times give a tone signal and then will tell you the values of that signal; Tone - if and when a signal is found, it will give a tone signal; Voice - if and when a signal is found, FastSatfinder will tell you the values of that signal; Mute - sound is disabled; Bird - if and when a signal is found, it will play singing the birds sounds; Alarm - if no signal is found - alarm; Music - if no signal is found, play the music. FastSatfinder can KWorld DVB-S 100 TV Card Remote Control the values of a signal in nine different languages: English, French, German, Italian, Polish, Portuguese, Russian, Chinese or Turkish simply by clicking on the flags from the country where each language is spoken.

Double-click on the control panel to view the graph of signal in full-screen mode. Advanced Modules Determine the proper dish angles To determine the proper dish angles and to direct the antenna at the desired satellite Click on the 'Dish Alignment' button. I am not certain that this is correct, but I used it as a V4L capture card and it worked. Audio Unlike Knoppmyth Mythdora uses the saaalsa module.

KWORLD DVB-S SE PCI Satellite Free-to-Air, Remote, S-Vide: : Computers & Accessories

However it usually starts with the volume turned all the way down. Use the fix below to adjust the sound of the card: Make sure it is using the right soundcard and you may also have to change the Passthrough to the Alsa option.

The information may be useful to other distributions. It was created on Feb 20, That's it for video.

KWORLD DVB-S 100SE PCI Satellite Free-to-Air, Remote, S-Vide

You should now see your card show up in the KnoppMyth setup of capture cards. Audio A lot of the documentation I found said to use the saaalsa module for sound; this module is not loaded by KnoppMyth by default, and I found that when I loaded it, it caused a kernel panic.

Asus K52JB SRS AudioShop by category
HP Pavilion DVD-RW Optical DriveShop by category
Dell Latitude E6500 Panasonic UJ-862A 9.5mm trayload SATA DVDRWWarranty Information:

However, there is another module that provides sound for the saa and that is saaoss. This module worked great for me.

You need to tell KnoppMyth to use this audio device in the capture card setup. By default, the sound may be muted, the volume may be too low, and automute may be on not sure what effect automute has. In order to ensure these settings allow sound to come through, you need to use the video4linux 2 control utility v4l2-ctl to change them: It requires patching the kernel.

In order to do this, you need to download the kernel source, which can be found at ftp: This will create a. Now you'll need to apply some patches. This will help if you installed an incorrect or mismatched driver.


Problems can arise when your hardware device is too old or not supported any longer. Scheduled Recording function allows users not to miss any TV shows ever again; especially it provides a powerful function - S. DVB-S also includes a fully featured Infrared Remote Control which allows users to access every feature with a simple press of a button, KWorld DVB-S 100 TV Card Remote Control shutting down PC via the remote control. Free Download KWorld DVB-S TV Card Remote Control Utility (Other Drivers & Tools). KWorld DVB-S Digital Video Satellite TV Card - Digital TV, Remote Control, PVR, MPEG2 Encoder, EPG, Picture-In-Picture.

Item#: O Model#.

Other Drivers