HP REALTEK USB 2.0 CARD READER DRIVER DETAILS:
|File Size:||18.8 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
HP REALTEK USB 2.0 CARD READER DRIVER
Getting a Realtek SD card reader to work on Linux (Tried and tested on Debian)
Taken from Wikianswers Dec 22,2: Not sure if it would have worked without the tape but worth a try. Andy10 Jan 1,1: Then I pushed the tape in and went back into the drive then into each folder and went to properties and was finally able to remove the READ ONLY box and thus HP Realtek USB 2.0 Card Reader and add files that needed changing.
I have two Kodak SD cards I got at the same time and have not used either very much. The other has the Write Protect WP problem. I can read picture files off it, but whether in the laptop or either card reader, I cannot write to it.
Tape does not seem to help nor does moving the write protect tab slightly one way or another. Both SD chips seem absolutely identical. Here is a link to device manager. You can plug the card into another PC to see if it works.
HP Card Reader Drivers Download for Windows 10, , 7, Vista, XP
If the card reader is stuck with dust, it will lead bad contact between the card and the card reader. Try cleaning the card reader slot and see if this solves the problem.
Verify that the card reader has not been disabled in the BIOS settings. The SD memory card drive is not detected when it is inserted into the card reader? The SD card is not working on Windows 10 but works fine on Windows 8.
Many Windows users come across the SD card reader not working error after the Windows 10 update and fail to get access to their important SD card HP Realtek USB 2.0 Card Reader. Make sure your SD card is not corrupted and make sure the gold connector of the SD card is attached to that of the card reader. You can use an eraser to wipe away the dirt on the gold finger of the card and re-connect it to Windows.
Insert the card into another Windows 10 computer to see if it is recognized. If the PC fails to detect the SD card, you may need to check the card reader slot on the computer. Insert the SD card into an external card reader, for example, a USB card reader, to test if the computer could recognize it.
However, this morning I got a chance to get working on a Cubieboard 2! So got an SD card and was all prepared to get an OS up and running on it. But as luck would have had it, the SD card refused to do anything. Tried checking the dmesg log, and got this: This was my lspci output: HP Realtek USB Card Reader Driver Rev.A. This is a self-extracting compressed file that contains the Realtek USB Card Reader.
SD Card Reader says the card is write-protected - Computer Brands
2. Double-click the downloaded file and follow the on-screen instructions. Hi: There is only one card reader driver from Realtek that works all of them Download, unzip and run the setup application from the 1st file.